Low Temperature Casting System - LT1
The LT1 Low Temperature Casting System has been designed to create unique links between Design & Technology and other curriculum areas such as ICT and Art. At the same time it offers a cost effective and safe method for demonstrating casting and moulding techniques.
Top Key Features
- Thermostatically controlled at either 250°C or 150°C
- Ready to use in 15 minutes
- Maximum temperature 260°C
- 2.3 kg Crucible capacity for Lead Free Pewter
Overview
The LT1 Low Temperature Casting System has been designed to create unique links between Design & Technology and other curriculum areas such as ICT and Art. At the same time it offers a cost effective and safe method for demonstrating casting and moulding techniques.
It allows casting and moulding to be undertaken in a standard classroom environment away from traditional workshop areas. The system is simple, easy and safe to use requiring only a standard 13amp 230V AC socket. It does not require any extraction system. It has been designed so that pupils can observe safely the physical processes of melting and pouring metals.
The unique cooling system keeps the entire case cold to the touch. The internal melting pot has a clearly labelled swivel lid for observing the state of the molten metal and adding new material.
Key Features
- Thermostatically controlled at either 250°C or 150°C
- Ready to use in 15 minutes
- Maximum temperature 260°C
- 2.3 kg Crucible capacity for Lead Free Pewter
Dimensions
Width: | 242 mm |
---|---|
Height: | 300 mm |
Depth: | 280 mm |
Weight (Net): | 10 kg |
Technical Specifications
Electrical: | 240v AC @ 6amps continuous |
---|---|
Features: | Maximum Mould Size 100 x 30 mm in the mould holding device Larger sizes can be achieved without the use of the mould holding device |
Supported Material: | Lead Free Pewter |
Warranty: | 2 Years |