Safety Tilt Crucible Furnace - CM450PB

The CM450PB is fitted with a high performance burner and control system incorporating a fully automatic start sequence which is initiated by the touch of a switch. 

The furnace offers fast melt times over a wide range of metals, from aluminium to bronze, brass, copper, gold and silver.

Top Key Features

  • Fully automatic burner control and ignition system
  • Super efficient insulation
  • ATP10 Capacity crucible pot
  • Crucible lid
  • Tilt handle

Overview

The CM450PB is fitted with a high performance burner and control system incorporating a fully automatic start sequence which is initiated by the touch of a switch. 

The furnace offers fast melt times over a wide range of metals, from aluminium to bronze, brass, copper, gold and silver.

Key Features

  • Fully automatic burner control and ignition system
  • Super efficient insulation
  • ATP10 Capacity crucible pot
  • Crucible lid
  • Tilt handle
  • Pouring gauge
  • Degassing plunger
  • Skimming ladle/dross lifter
  • Safety burner cut-out prevents burner operating when drum is tilted
  • Operation/Instruction manual

Dimensions

Width:630 mm
Height:330 mm
Depth:330 mm
Weight (Net):28 kg
Weight (Gross):28 kg

Technical Specifications

Electrical:50 Watts - 220 - 240 Volts
Safety:IMPORTANT: Fume Extraction is mandatory as per HSG258 / COSHH regulation. Please contact us for advice and cost.
Speed:

TYPICAL MELTING TIMES FROM COLD

Aluminium: 2.9 kg in 25 minutes
Copper:10 kg in 40 minutes

Warranty:2 Years

PLEASE STATE GAS TYPE WHEN ORDERING

IMPORTANT NOTICE: ACCORDING TO THE HEALTH & SAFETY AT WORK ACT 1974, BS 4163 AND COSHH REGULATIONS IT IS MANDATORY THAT ALL FUMES MUST BE REMOVED AT SOURCE.

Performance

Forging Performance

Gas TypeRateBTU / HRSkWPressure
Natural gas1.36 m3/h5000014.620 mbar
Propane1.0 kg/h5000014.635 mbar
Butane1.06 kg/h5000014.628 mbar

 

MELTING TIMES

Typical Melting Times from Cold
Aluminium:2.9 kg in 25 minutes
Copper:10 kg in 40 minutes

Optional Extras

  • Replacement ATP10 crucible pot and lid
  • Raised sand tray, 1200 x 800 x 300 mm (no need for a casting pit)
  • Face shield
  • Heat resistant gloves
  • Chrome leather leggings
  • Chrome leather apron
  • Combined lifting and pouring handles for multiple pours
  • Hardware support casting kit
  • Moulding Bench
  • *Fume extraction to meet the requirements of COSHH Regulations

 

*Fume extraction is mandatory as per HSG258/ COSHH regulations. Please contact us for advice and cost

Downloads!!!

There are currently no videos available